Wooden sports flooring in the Area Elastic range approved by FIBA, formed of a single layer of slatted phenolic plywood. The pre-finished beech, oak or maple surface is fixed to the plywood layer and coated with high-resistance varnish.
Shock absorption is provided by a pre-manufactured elastic underlayment, made of recycled tires, treated and encapsulated sandwich-like between two polyester layers.
The base provides excellent comfort, uniform shock absorption and a completely uniform response across the entire surface. The system is recommended when an underfloor heating is installed, because Zeta System FTS can assure an homogenous and continuous heat diffusion on the surface.
Zeta System FTS has obtained the CE label and complies with European standards EN 14904 and the requirements of international sports federations.
|38 mm||19,8 kg/m²|
For all the orders Mondo Spa reserves the right to deliver a 10% maximum amount of rolls with a shorter length than the length requested, and / or at least one roll.
For special colors, the minimum order is 1.000 sqm with the collection of eventual over-made production and short rolls. Price increase of 20%.
Indoor sport wood flooring system is a natural product that is completely installed on site. Therefore installation conditions are important factors to achieve the best final results. Before starting the installation, the facility must be completely closed (windows and doors already installed) and perfectly dry. The environmental temperature during installation (day and night) must be over 15º C and relative humidity must be between 45% and 60%.
To properly maintain the sport wooden flooring system, the building must have an adequate air circulation and / or a ventilation system. Large windows, with direct sunlight over the wooden floor, must be covered. The same conditions as per installation apply. The environmental temperature (day and night) must be over 15º C at all times and relative humidity must be between 45% and 60%. The owner is responsible for ensuring these conditions by use of an environmental thermometer and a hygrometer for direct detection. The required conditions are indicated not only as desirable but as mandatory to be considered within the official warranty guidelines.
For regular and special cleaning and maintenance of MONDO wooden systems it must exclude the use of scrubbers, single disc-machines, water jet, vacuum with a revolving brush and / or so-called liquid solutions.